351 swap with np435 and 205

[4linked]

has anyone done this swap before i have everything in and running. im trying to figure out what to do for a clutch linkage theres no room for the mechanical linkage anyone have any input there isent much room for a big master to go hydo so idk what master and slave to use if i go hydro

 

[projectnitemare]

If i remember correctly there were some guys using NP435s behing 4.0s using a hydraulic setup.

Here is one option http://www.novak-adapt.com/catalog/kit_hcrf.htm

I believe that's what most people are going with.

Matt

 

[4linked]

thank you thats what i was looking for. i think im going to use the pull style from summit. theres no room to use a slave in front of the fork due to the headers being so close to the bell housing.

the other problem im having is the stock master cyl has a plastic line for stock slaves only and i need a steel line for a afftermarket slave like the novak or summit is there a diffrent master that fits in the little room rangers have?

 

[Teddyzee]

http://www.summitracing.com/parts/RUS-640281/