2WD 3 inch Suspension lift for CHEAP

[407Link]

Do you just need shocks with the spindle lift or is there any other parts? mines torsion

 

[RollinWOT]

I'm not sure what's all included if you get a setup for the torsion bar suspension, but my truck is a coil spring setup, and it includes the spindles, shocks, etc. Check out what Jim has on his parts site.

 

[mp3deviant721]

Do you just need shocks with the spindle lift or is there any other parts? mines torsion

Not necessarily, new performance shocks are a good idea however.

 

[RollinWOT]

^x2. I'd go with a set of Fox Racing Shox or some Bilsteins.

 

[Bennybooster]

^x2. I'd go with a set of Fox Racing Shox or some Bilsteins.

it would be pointless to pot on fox resi's if you only have a spindle lift, just get some blisteins

 

[RollinWOT]

Fox doesn't only make resi's, they also make hi-po aftermarket shocks too.

 

[Bennybooster]

the point is you won't need hi performance shocks on a spindle lift because they do nothing to make your suspension to perform better

 

[RollinWOT]

True, but if he's wanting performance shocks...

 

[06RangerXLT]

so pricing out camburg im looking at about 5000.

i may just go with something cheaper, though i havent decided. im running 32's on factory 2wd suspension though.

 

[RollinWOT]

Nice...you rubbing the inner fenderwells at all?

 

[K.Strong]

so pricing out camburg im looking at about 5000.

i may just go with something cheaper, though i havent decided. im running 32's on factory 2wd suspension though.

Are you running the 3.55 gears? If so how do they handle the 32? I want my next set of tires to be 33's but my wallet says it can't afford that and 4.10 gears haha.

Nice...you rubbing the inner fenderwells at all?

I would probably assume so, my 31's have the slightest rub with a good sized bumb.

 

[RollinWOT]

^makes sense.

 

[06RangerXLT]

Are you running the 3.55 gears? If so how do they handle the 32? I want my next set of tires to be 33's but my wallet says it can't afford that and 4.10 gears haha.



I would probably assume so, my 31's have the slightest rub with a good sized bumb.

ill put it nicely, its bad. with my auto, it has no power, and you cant punch it or you'll burn your tranny. its like im towing a 2000 lbs trailer behind me at all times.

i actually just bought a custom built 8.8 LS with 4.56 gears thats going in this weekend.

I wouldnt go higher then 31's if you dont plan on getting an axle. i get like 350 km in the city, though my highway mileage is awesome!

 

[06RangerXLT]

Nice...you rubbing the inner fenderwells at all?

oh and i have no fender liners, ive pulled and tucked everything.

 

[06RangerXLT]

heres the truck before and so far.