2011 front end "clunk"

[rayroy1]

Hey Guys

Im loosing my mind here trying to figure out where this noise is comming from.

I just installed a readylift and beltechs on my 2011 4x4, did an alignment and now there seems to be a bit of a clunk when i hit bumps. It sounds just like a worn ball joint but the trucks only got 4000km on it. I thought maybe it was the shocks topping out. I did the lower shock spacer supplied by readylift and tried the shock spacer (5/8 nut on top of shock) that was mentioned on a previous post. The spacers had no effect on the clunk...?

Any thoughts guys and gals?

Is it possible the shocks are still topping out? If so would longer shocks be the solution....?

Any input would be greatly appreciated..

Thanks,

-R

 

[06RangerXLT]

remove shocks, drive it. no clunk means you need proper length shocks. and check you didnt leave something loose.

 

[rayroy1]

Ill give that a shot

Any suggestions of a decent shock and shock length for a 2-2.5" lift?

Thanks again,

-R