2011 Ford Ranger Sport Right Rear Axle

[Robert Campbell]

Hello,
Hew to the forum. Chose the general discussion area for a quicker response. I have a 2011 Ford Ranger Sport 2 wheel drive and have a bent right rear axle. It is a 8.8 rear end with a 28 spline axle. I cannot find one anywhere! If you can help, please respond and let me know!! Yukon, Randy's worldwide, and Ford do not have one. This is the 2010 and 2011 axle only for a rear disc brake set up.

Rob Campbell

 

[Blmpkn]

How'd you manage that?

Check www.car-part.com.


Also, welcome!

 

[Robert Campbell]

Snow accident. Blind corner, stopped semi right in front of me. tried to change lanes...... wham!!!! Center punched the bed and bent the right rear axle.....

 

[pjtoledo]

are you sure the housing is straight?
I believe the 4 cylinder and V6 axle shafts are the same.

Differential Housing. Axle Housing - Rear. | FordUS

damn, that is a hard part to find.
the best I could do is find a picture of it. the shafts are not listed in the related parts except the generic 4234 axle designator.

 

[lowspeedpursuit]

Is the functional difference having disc brakes, or is it the 4wABS tone ring?

I'm talking totally out of my ass here, but if the lengths are otherwise the same, I imagine to get back on the road ASAP you could run an earlier axle and lose ABS, or ABS at that wheel. Not sure how hard the computer would freak out and compromise driveability.

It looks like the tone ring has a pretty wide ID and must press onto a shoulder, so I doubt you could adapt yours onto the earlier axles without a custom bushing.

 

[franklin2]

Seem to be more in Canada than in the States.

2010 Axle Shaft Ford Ranger	RH,REAR AXLE, 8.8" RING GEAR	A​	22H080	129.11 --Can-- $175.00​	Ideal Auto Wrecking Ltd. Can-BC(Chilliwack) Request_Quote 888-718-1118 / 1-604-824-1822 Request_Insurance_Quote
2010 Axle Shaft Ford Ranger		X​	220041	$Call​	Pieces d'autos Leon Jacques et Fils Can-QC(Coaticook) Request_Quote 819-849-6845 Request_Insurance_Quote
2011 Axle Shaft Ford Ranger	Rear Axle, 8.8' ring gear, RH, RWD	C​	1202223288	$Call​	603 Auto Salvage USA-NH(Plaistow) Request_Quote 603-392-7313 Request_Insurance_Quote
2011 Axle Shaft Ford Ranger	Rear Axle, 8.8' ring gear, RH	A​	11RNGR22	$Call​	Lion Auto Recycling Inc. Can-ON(Toronto) Request_Quote 416-357-7278 Request_Insurance_Quote
2011 Axle Shaft Ford Ranger	Rear Axle, 8.8' ring gear, RH	A​	11RNGR22	$Call​	Lion Auto Recycling Inc. Can-ON(Toronto) Request_Quote 416-357-7278 Request_Insurance_Quote

011 Axle Shaft Ford Ranger

RH,4.0L,F-5,REAR

A​

TT022

$Call​

Team Auto Parts Can-MB(Winnipeg) Request_Quote 1-204-222-7333/1-888-832-6870 Request_Insurance_Quote

2011 Axle Shaft Ford Ranger

Rear Axle, 8.8' ring gear, RH

A​

BP1722

$Call​

Blackpoint Auto Salvage Can-BC(Powell-River) Request_Quote 604-487-1299 Request_Insurance_Quote

 

[pjtoledo]

the 2010/11 axle shafts are a slightly shorter length than 2009 and earlier. the center of the disks are thicker, so the overall wheel mounting distance is the same.
2010/11 rear axle does not have a tone ring inside the differential, it has one on each shaft near the bearing.

the tone rings are used for RSC, roll stability control. not sure how the computer would handle them being missing.

 

[pjtoledo]

post # 8 for a 2004 to 2010 comparison

2010 axle vs 2004 differences | The Ranger Station

 

[Robert Campbell]

Thanks for the quick reply's!! Pretty confident that the housing is fine. I have found one in Arizona, but they want 400 dollars for it plus shipping. I will more than likely get it, but may try some of the links in the post above. THANK YOU again!!

Rob

 

[sgtsandman]

Thanks for the quick reply's!! Pretty confident that the housing is fine. I have found one in Arizona, but they want 400 dollars for it plus shipping. I will more than likely get it, but may try some of the links in the post above. THANK YOU again!!

Rob

Have you considered getting a whole used axle? It's been a good number of years since I bought an axle. So the price has probably gone up since then but I paid about $300 for a whole 7.9" Ranger axle. It might be worth looking into considering how much just a shaft is.