2006 Ranger FX4 Level II

[6.2]

I'm gonna do a gloss black

Also, mounted a Rubbermaid action packer in the bed today. Tough boxes and holds my recovery gear and some other shit perfectly. Now my cab is free of clutter.

Dark out so pictures tomorrow.

 

[6.2]

Here pics of how I mounted it. Used a grinder to cut angle iron in half giving me two flat pieces. Used self tapping screws and it's now mounted solidly. Took it down some crazy rough roads and hasn't budged.





These are tough boxes, very sturdy and lockable.



It's the 24gal version.
Fits:
30'x2" town strap (50,000 kbs rating)
30' bubba rope (rated at 52,000 lbs I believe)
Hitch
Squeegee
And I'll probably get a small fire extinguisher and a folding shovel.

Lots of room, cost $30 + mounting supplies (I had that stuff laying around)

One of my cheapest favorite mods.

 

[IslandBlue01]

Taillights look good.

 

[6.2]

Thanks I'm actually thinking about swapping them out

 

[brinker88]

How do you like those BubbaRopes? I've seen the advertisements and wanted to know what you though first hand.

 

[6.2]

Honestly, haven't had to use it yet which is a good thing I guess, but its very well built from what I can tell. And it's pretty light for what it is.

If I ever have to use it I'll report back on it.

 

[6.2]

Picked up these lights locally for $20.

http://www.amazon.com/Navigator-NV-1204-Clear-Light-Stone/dp/B00029X3QW/?tag=959media-20

Will eventually be used as rear facing lights but for now I'm gonna throw em up front.

 

[6.2]

Got em installed. Just gotta wait for dark now.

 

[6.2]

Just cleaned the truck inside and out. Actually used soap this time to.

^ they look so damn good clean, with a touch of dust to bring out the letters and sidewall design

 

[Thed]

How you liking them Falkens?

 

[6.2]

I am absolutely loving them! Will probably never run a different tire.

 

[Thed]

I am absolutely loving them! Will probably never run a different tire.

That's what I was thinking of getting for my Pre-runner project. Always love to hear others' input.

 

[6.2]

I'd go for it man. Great tires.

 

[6.2]

just gonna dump these here. found the limits of my flex. rubs on the front of the flare. any more and it would have started ripping it off.

then i bedlined a piece of angle iron and bolted it onto the lights. now have a legit light bar to bolt more lights onto, and it looks better, also sits right on the bumper so its 100% sturdy and no bouncing lights anymore

 

[6.2]

Decided to re-do my dome light. When I changed it out for the LED panel I tinted it with nightshades, but now that I'm in it more at night I realized its a touch to dark tinted. So I cleaned the tint off, and am doing something custom to it. Painted the edge to match the gray on the exterior.

Few pictures.

Before.

Tinted:
Apparently I don't have a picture. But it was black lol.

Starting over:

Clear coat is drying now.

Nice custom touch IMO