Welcome Visitor! Please take a few seconds and 
Z7What
Active Member
I recently purchased a 2001 2WD Ranger and in the near future I want to put a slight lift/leveling kit on it. A good friend of mine gave me a set of 17X8 OEM 96 Cobra Wheels that I would install at the same time. I was thinking a 1.5-2" front kit and a 1" rear block. The stock tire size is 225/70R15 = 27.40X8.86. I was thinking of going with a 235/60R17 = 28.10X9.25 so the tire would only be around 3/4" taller. I doubt I even would need lift/level it but I figure it would look much better sitting up a little more.
So with that being said. Who makes a 1.5-2" spring, doesn't anything else need to be changed like UCAs, Etc? Are spacers made that would do the same thing? I saw one another forum the talk of coilovers, does someone make a conversion kit? I have adjustable coilovers on my F150 and love them.
Last but not least, what lugs are needed to install the Cobra wheels and will spacers be required?
Thanks! Wayne
So with that being said. Who makes a 1.5-2" spring, doesn't anything else need to be changed like UCAs, Etc? Are spacers made that would do the same thing? I saw one another forum the talk of coilovers, does someone make a conversion kit? I have adjustable coilovers on my F150 and love them.
Last but not least, what lugs are needed to install the Cobra wheels and will spacers be required?
Thanks! Wayne
