2000 Explorer, Where to find the Door lock combination?

[BillRod]

Hi All

2000 Ford Explorer.
Where can I find the combination for the door locks?
Is it located anywhere in the truck or do I have to go to a locksmith?

Thanks
Bill

 

[Explorin94]

Are you talking about the keyless push button entry? If so I have heard that it is sometimes written on the inside of the "C" pillar trim from the factory. Sometimes......

 

[PetesPonies]

It's written on the keyless entry brain. In my Lincolns, that was always in the trunk up under the package tray. On your explorer, I do not know where that is. I bet it's behind a panel in the rear area.

 

[UrbanRedneckKid]

Take the cover off the left rear side panel. You should see your jack and tools.

If you look forward behind the panel there, you will see a module with a harness plugged into the back of it.

The code is in big bold numbers on the outside of it, facing the interior side of the truck. It'll be 5 digits.

You might be able to pull the panel out and read it. If not, get a small dentist's/ mechanic's mirror and a flashlight.

Put the code in the door to unlock the driver's door only, then you can push 3 to unlock all doors. Pushing the last 2 buttons will lock all doors.

Sent from my PG86100 using Tapatalk 2