Welcome Visitor! Please take a few seconds and j.khommel
New Member
- Joined
- Sep 2, 2010
- Messages
- 1
- Vehicle Year
- 1996
- Transmission
- Manual
Hello Ranger Fans! I have problem I just can't seem to solve.
My blend door actuator quit working so I replaced it with a new one. When I move the temp dial I feel the motor inside the actuator moving but the white actuator doesn't move. I Then replaced the potentiometer on the climate control. Still same problem. Took actuator back to advance auto parts and exchanged for a new one. Same problem. Took that one back and exchanged for another one. Same problem.....
Ok you can see where this is going. I replace fuse #10 which provides power to the actuator. I hope someone can help. Thank you in advance!!!!!
My blend door actuator quit working so I replaced it with a new one. When I move the temp dial I feel the motor inside the actuator moving but the white actuator doesn't move. I Then replaced the potentiometer on the climate control. Still same problem. Took actuator back to advance auto parts and exchanged for a new one. Same problem. Took that one back and exchanged for another one. Same problem.....
Ok you can see where this is going. I replace fuse #10 which provides power to the actuator. I hope someone can help. Thank you in advance!!!!!
