1994 Ford Ranger 2.3L Turbo

[ERNST]

I am installing a turbo on the 1994 2.3L and need to find a bracket to mount the coils as there stock position is in the way of the turbo. Is there a commercial one avalible? Or does someone have a suggest? Thanks, Ernst

 

[scotts90ranger]

I did this:

It's the stock bracket used on my '90 engine but I spaced the coil out about 1 1/4" to get out of the way of the coolant hoses going to the oil cooler.

I'm only running 4 plugs on my setup and it works fine, but the drivers side coil bracket for a '89-90 might also work for you, it's mounted basically just under/behind the power steering pump. There was also a setup that put both coils on a pedestal behind the alternator but I don't know what years those were, maybe '92/93

 

[hawls21]

I have an identical truck and am thinking about adding a turbo and am interested where and what you got your turbo for.

 

[DJ2.3]

If you are not running a/c, you could make a mount up for them both where the a/c compressor goes.