Welcome Visitor! Please take a few seconds and jimtur
Member
Hello,
I decided to upgrade the OEM headlight since the lightining performance is similar to a candle light... I put an pair of LED without success. The light pattern was not really good. So, I decided to upgrade with a projector pair into the OEM headlight. I removed the headlights from the mini truck, splitter the lens from the housing, installed the protector and put the lens in place using clear silicon. The light pattern is not perfect as the projector himself (the beam light is disforme by the lens) but the final result is close the projector lighting performance. I had to rewire the high beam with a diode (OEM spec can't allow to use low and high beam together. The projector is different; low beam use low beam only, high beam use low and high beam; high beam open activate the selenoid opening the high beam light). I spend 80$ CAD for the protector kit including the lens/wire/LED bulbs and 3 hours of labor. The modified headlight look like the original headlight.
Jim
I decided to upgrade the OEM headlight since the lightining performance is similar to a candle light... I put an pair of LED without success. The light pattern was not really good. So, I decided to upgrade with a projector pair into the OEM headlight. I removed the headlights from the mini truck, splitter the lens from the housing, installed the protector and put the lens in place using clear silicon. The light pattern is not perfect as the projector himself (the beam light is disforme by the lens) but the final result is close the projector lighting performance. I had to rewire the high beam with a diode (OEM spec can't allow to use low and high beam together. The projector is different; low beam use low beam only, high beam use low and high beam; high beam open activate the selenoid opening the high beam light). I spend 80$ CAD for the protector kit including the lens/wire/LED bulbs and 3 hours of labor. The modified headlight look like the original headlight.
Jim
