1989 ford engine and tranny to samurai tcase

[alwaysFlOoReD]

http://www.therangerstation.com/forums/showthread.php?t=94200&highlight=c-4+trans
http://www.therangerstation.com/forums/showthread.php?t=97784&highlight=c-4+trans
http://www.therangerstation.com/forums/showthread.php?t=246&highlight=c-4+trans
http://www.therangerstation.com/forums/showthread.php?t=58524&highlight=c-4+trans
http://www.therangerstation.com/forums/showthread.php?t=32463&highlight=c-4+trans
http://www.therangerstation.com/forums/showthread.php?t=10035&highlight=c-4+trans
http://www.therangerstation.com/forums/showthread.php?t=493&highlight=c-4+trans
http://www.therangerstation.com/forums/showthread.php?t=4318&highlight=c-4+trans

 

[tinzuki]

http://www.therangerstation.com/forums/showthread.php?t=94200&highlight=c-4+trans
http://www.therangerstation.com/forums/showthread.php?t=97784&highlight=c-4+trans
http://www.therangerstation.com/forums/showthread.php?t=246&highlight=c-4+trans
http://www.therangerstation.com/forums/showthread.php?t=58524&highlight=c-4+trans
http://www.therangerstation.com/forums/showthread.php?t=32463&highlight=c-4+trans
http://www.therangerstation.com/forums/showthread.php?t=10035&highlight=c-4+trans
http://www.therangerstation.com/forums/showthread.php?t=493&highlight=c-4+trans
http://www.therangerstation.com/forums/showthread.php?t=4318&highlight=c-4+trans

Thanks sooo much! At times I feel bad for all the good info I recieve from forums with real enthusiast who have a passion for these cars and posses a plethora of knowledge. After this build (my first ever) I hope to return the favor. thanks! I'll look through and see what I can use.

Alex

 

[DL BOGART]

t case

Why not loose the sami t case, use the ford one that's already bolted to the transmision, and build 2 driveshafts? That would be a whole lot simpler, and wouldn't require the big parts search. Is there a big driveshaft alignment issue or something?

 

[alwaysFlOoReD]

Why not loose the sami t case, use the ford one that's already bolted to the transmision, and build 2 driveshafts? That would be a whole lot simpler, and wouldn't require the big parts search. Is there a big driveshaft alignment issue or something?

I think it's the passenger side drop for the front that's causing the problem.

Richard

 

[mhughes165]

what i would do all depends on how high u wanna go with this sami, ive seen guys leave the transfer case on it, then still run a divorced case afterwords for a super low gear.

but a 2wd trans is the only way togo, yo need to find the c5 that came behind the older rangers with the 2.8 i think 85 or older. thats what u need