Welcome Visitor! Please take a few seconds and jarfly
Well-Known Member
- Joined
- Oct 7, 2007
- Messages
- 729
- Age
- 34
- Vehicle Year
- 1987
- Transmission
- Manual
thought i'd share this.
my 87 4x4 stx radius arm brackets were wallered out bad.
i found a pipe that fit in the holes and my bushings fit perfect inside the pipe , good and snug.
i welded the pipe on each side and used a cutoff grinder disc and a burr grinder to clean up.
looks and works like a new unit.
my 87 4x4 stx radius arm brackets were wallered out bad.
i found a pipe that fit in the holes and my bushings fit perfect inside the pipe , good and snug.
i welded the pipe on each side and used a cutoff grinder disc and a burr grinder to clean up.
looks and works like a new unit.
