1994

Hey gang. I've been on this forum for almost a year now. Went idle for a bit when the Ranger wasn't running or being worked on. But we're back baby!! 1994 XL RWD 5-speed 2.3L Better known as Grimace Quick recap of how I got here: -bought non-running off FBM; claims it "only" needs a...

Hey everyone First time actually inspecting a cylinder head since I already have my entire truck disassembled and have been going through, cleaning and reinstalling everything. 1994 Ford Ranger with the 2.3 and manual trans, and has about 170k on it. Basically I'm just wanting to see if...

Hello, I found an engine for sale but the owner does not know the year. I'm wondering if anybody would be able help Identify the year of this engine? They think it's a 1993/94 but just want to make sure. Thanks.

This will be my documentation of how I TDI swap my ranger. Stay tuned. I will be posting most updates on my new member page, and saving this one to big updates.

This is the begining of the long process.

I have a 1994 2.3 ranger with a 5 speed. I bought it not to long ago and it's run a little rough at times. So went to replace the icm thinking that was the problem. Unfortunately it is the harness someone used a bunch of house ground wire to repair it and now it's my problem. I really l I e...

Hello! I have recently started working on a 1994 Ford Ranger. I know it has been sitting for a while, likely upwards of four years, but no way to truly determine. As of right now it is a crank-no-start engine. Prefacing this by saying this is not only my first pre-OBDII car I have worked on, but...

I recently replaced the upper and lower ball joints and outer tie rod ends on my '94 b2300. Afterward, I took it to a local shop for an alignment. They told me that they couldn't align it because the tie rod ends are wrong and the thread causes the alignment collars to just spin on the ends and...

I'm looking for parts to rebuild my 4x4 axle shaft. I recently bought a 94 Ranger, 4.0L V6 - I have a few questions: anyone know where I can find parts for a Dana 35 front passenger axle shaft anyone know what years of other Fords (Explorers/Broncos) use a Dana 35 I'm in Canada; I'm 17, I'll...

Hey guys, new here and recently picked up a 1996 XLT 4.0 that I finally have the time and energy to start playing with. I was curious if I would be able to swap out the stock grille on the 96 for a 93-94 STX grille like the one here? It looks like everything should line up/fit but I want to be...

Hey Folks! I been lurking for a couple months. I bought a 94 Ranger 2WD manual 2.3 just recently. It has ONLY 94k miles! It didn't run great when I bought it, but I've gotten it seemingly smoothed out quite a bit with some basic maintenance. (plugs + wires, trans oil, diff oil, O2 sensor...

I know I have a few threads posted on here but what can I say, I love working on these things! I can’t remember if I ever posted this truck and if I did, I can’t seem to find the post.... What I stumbled on is a SUPER CLEAN and well taken care of 1994 ranger ex cab with a perfect rust free...

Hi! Does anyone happen to have a diagram should all the grease zerk fitting locations on a 1994 Ford Ranger? Thank you.

My new to me 1994 4x4 extended cab. THE DOME/CARGO LIGHTS ARE ALWAYS ON WHEN THE IGNITION IS OFF. I have to disconnect the battery or it will drain to 0 over night...I checked online for a fuse, but no listed location, I pulled the 10 amp labeled "1" in the diagrams and the lights go out, but...

Hi, all. Yesterday I bought a 1994 Ranger XLT SuperCab 4x4 with the 4.0 V6 and a 5-speed. I'm pretty pumped about it, especially since it's absolutely identical to my first vehicle, except that was an automatic trans and I always wanted the stick shift anyway. Side note: never sell your first...

I have a 1994 ford ranger xlt with the flag style manual mirrors. I found these kool vue manual mirrors that look like they have the same bolt pattern but the listing says they're for a 1998-2005. If someone could let me know if they fit my 1994 that would be greatly appreciated :icon_thumby...

Yesterday my abs light came on and started flashing. It flashing a total of 16 times and from what I have tried to gather up thats code 16. Not sure what the code means. Any help on that would be appreciated. Later that day along with the abs light I found out that my dash light was not...

As tile said I got a 94 Ranger It will turn over fine but won't start >Timing is correct >spark plugs are new Bosch >New plug wires >New coil packs >New CPS >MAF is original but works fine >New fuel Pump and filter >New fuel pump and ecm relays >Tps is within specs >New ICV >Rebuilt engine...

Ive had this truck for a few months and I have replaced a lot of parts on it - radiator, maf sensor, iac, tps, fuel pump/filter, water pump, fuel regulator, both coil packs, plugs and wires. It had a misfire and loss of power (code 224) so I thought it was my icm. I took my icm out and was...

Been awhile since I checked in here, but figured I should start here for problem solving.. Recently came into possession of a 94 F150 4x4 302/Auto. If the truck sets overnight it will tend to have a low/rough idle when it drops from high idle, and almost tries to stall. A quick flick of the...