• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.


  1. Biosphere

    Radiator Support Finally

    Thought I would share my process on the radiator support. Will post completed pictures tomorrow.
  2. 95 to 01 body

    I’ve had a two rangers, a 2001 that’s was absolutely gorgeous before it was totaled and now I have a 95 ranger that is also amazing but ugly af. My question is if I get the body panels form a 01-03 (the ones with the honey comb grill) with the go on my 95 ranger?
  3. DeathTrap

    Flatbed storage seals

    I built a flatbed for my ranger and welded in a custom storage box in the center, I have no idea on how to seal the top cover to keep water out, any ideas would be appreciated
  4. FlooredCustom

    Rusty Ranger Danger

    Hi fellow Ford enthusiasts, I recently acquired a 1989 Ford Ranger Custom 2.3L 4wd, manual transmission, its a beauty. I knew i had some rust to repair on the body but didn’t know at what point it was dangerous. My clutch and my break booster both let go while I was driving on the highway...
  5. 2000 Ranger bed. What years Fit?

    I have a 2000 Ranger XLT that needs a bed. Does it have to be from another 2000 for my tail lights to fit or will any other year work??
  6. Colton Smith

    Help: DIY gap covers for body lift

    Hey guys I'm doin a 3" body lift and wondered what could be used to cover the gaps in the wheel wells for cheap. I was thinking thin rubber matting or something. Just not sure where I can find something like that for a fair 20-30 bucks. Any ideas would be appreciated. Thanks.
  7. 3in. body lift

    i have the chance to get one at the junkyard for 50. but from what i could tell there is no steering extender thing. I also noticed that my trucks stick shift is different then the one pictured for the extender, would this be ok not extended. would this even be worth it to get it? it looks...
  8. PRanger

    Throttle Body problem

    Was trying to clean my throttle body and IAC this morning.. Got the IAC clean but I can't get the hose that is connecting to the throttle body to even budge. Is there a technique to getting it off without destroying the rubber? here is a pic so I can clarify what im talkin bout thanks for...
  9. Need Help

    I rolled my '01 Ranger Edge but the frame is still good. I want to just replace the cab for now to make it drivable again. I was wondering if I have to have the cab from another Edge or can it be just a regular Ranger cab. I was also wondering if a cab from a different year model would work.
  10. Lonewolf613

    Front End Swap

    Hello, I'm new to the ranger station and i was wondering if anyone could help me out. I own a 1990 ranger ext. cab and i was wondering if it is possible to just bolt on the front clip from an 83' to 88' ranger on to the 90' core support and inner-fenders with little to no modifications, if...
  11. Body Lift

    i have a 2010 Ranger are there any body lift kits available yet i'd like a 3in back and 4in in the front

Sponsored Ad

Sponsored Ad