I've replaced both O2 sensors, as well as the TPS since I had it, miss seems to be cylinder 1 and it has spark, feeding it injector cleaner, fuel leak was the fpr o-ring, also repaired, as well as several vacuum lines. Will diagnose the miss and fuel pump monitor wire further when weather...
I bought a new rig recently after getting out of RBVs for a good while, and am looking into some key issues that it's throwing at me. I've ran several KOEO tests. I'm seeing a left O2 sensor "too lean" and "too rich" code, "EGR flow lower than expected" "fuel pump secondary circuit fault" and...
Where would one source the replacement springs? I know you can just buy em for MSD distributors but I didnt know there were others available for duraspark units. I'm running a 390cfm as well.
Edit: misread this entirely, I get the tab bending thing now. At first I thought there was a heavy...
Thanks for your help guys, I'll go with the duraspark then. I would like to get a programmable msd computer in the future, but Id rather not spend quite that much money right now. I already did all my research and I can have everything but the duraspark wiring harness for ~$170. This does mean...
I did some reading and saw that there are/were harnesses to convert your tfi over to msd ignition, but it didnt clarify if that allows you to eliminate the feedback carb and some of the various controls. Is there a way to run a digital MSD box and the 4bbl? Would like to have a 2-step limiter...
Yea mine's definitely a 2150. Im trying to make the poor thing run "good enough" until I have the time and money to throw at all the parts to convert it over. It starts up instantly right now so I should probably leave it alone until later. I wanted to know if the cruise could work before I did...
From what I read the feedbacks were VV, but maybe I'm wrong. If that's the case I'll tear the "reman" apart and stuff my old one's jets in. It might also have bad timing since it pops and misses anywhere above 4500rpm, even free revving. It seems to be an issue that compounds into fuel...
I figured someone had messed with the variable venturi jets when "remanufactured" as well as the float being off. I'll look at it this weekend when I drive up to where it's currently parked. It's not clogged with junk, and didn't run out of breath when I ran the electric bypass pump temporarily...
After gawking at this engine bay for awhile, the piggybacked clip is broken off the throttle, which I know I can fix with zipties, what I cant fix is the mess of vacuum lines on this thing. I've found the diagrams for all the smog junk, but not one for how the cruise hooks up. Anyone have a...
I recently picked up an 85 2.8 5 speed B2 after finding it was optioned almoat exactly how I wanted one when I was in high school. Its kind of a replacement for my wrecked 84 Ranger from a few years back. Like the 84, its from a junkyard. Unlike the 84, it has all the smog crap and won't pull...
My Bronco II had a little rectangular mirror on the passenger side sun visor, it came unglued when I put the visor down today and of course cracked when it hit the floor. I thought it was after market but I found a ford logo on the back. It looks like this one...
If all goes well I'll have my rig done up by then. Depending on how things pan out, it could be stock or built. Who knows. Either way it'll be able to make it. I'm new, but I've always wanted to go on one of the TRS trail rides.
Any idea if these could become a yearly thing again?
Found a source for a 2.8 4bbl manifold and carb, and am planning a duraspark conversion if I can get the intake/carb for cheap. What kind of power boost can I expect? I later plan on swapping the valve seals out, as it is smoking a bit, and sticking a cam in it. What kind of power can I expect...
Durr, I had a brain fart and was thinking this year. Must have been around too much brake kleen today...
In that case it should be lifted, with the 4bbl and duraspark, and the rooftop tent by fall next year. Maybe even a D35 front!
I like the idea. Personally I think NC would be good, pretty much smack-dab in the middle of the east coast, and close to a lot of states. In my head it sounds like a great idea. I'd try to make it down in my orange truck, it probably will still be stock if y'all have this in the spring, but by...
I've seen 33's stuffed under a 4" with little rub so I'd like to think with some trimming and a Duff 6" lift you could run 35s, but could a 2.8, d35, 7.5", and 4.56 gears power it? And has anyone ran 35's on a 6"? I'm trying to avoid body lifts and I can't find any pictures. Will be a long time...
So the story goes, my dad bought this "Bright Bittersweet" orange Ranger new in 1984. He threw on a black frame-mount brush guard that saved it from being totaled at least once, had some American Racing Outlaws installed, and named it. Sold it in 2004 when I was 5 years old. Years passed, now...
I'm sure it's been asked 500 times, but I can't find much about it. My truck came with an already halfway-removed smog setup, with a bunch of hoses and lines hanging everywhere, and I want to bypass it and remove the pump while still having my ignition system function properly. Any way about it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.