410 cam coil bind

[94sploder]

hey guys new to the forum im working on my 4.0 ohv engine and i purchased the 410 cam i installed it no issues there but from previous threads i saw that you need custom length pushrods so i called smith brothers and had 5.550 pushrods made and me just spinning it over with a ratchet it seems like the coils are binding too much but with new stock length pushrods this issues goes away but im assuming this much bind isnt ok but let me know what you guys think

 

[alwaysFlOoReD]

IMO bind is when all the coils touch each other. I dont see bind in your pic.

 

[94sploder]

IMO bind is when all the coils touch each other. I dont see bind in your pic.

i

IMO bind is when all the coils touch each other. I dont see bind in your pic.

its ok for the top 3 coils to be touching like that ? i only imagine that it will get worse when running up the rpm and with the lifters being pumped up fully ,maybe i will just throw some new stock style springs in and run it just dont wanna put it all back together and have issues