1994 Ford Explorer dash in 1988 ranger

[rocketkart]

Looking awesome!!!

 

[rocketkart]

Any of you guys heard of any successful egr delete without throwing a code ? Only ask because I have the aftermarket headers and it does not have it Where I can hooked the EGR pipe back up on this 4.0 ohv

 

[Shran]

Truck looks really good!

Might try this - https://www.egrperformance.com/prod...l-7-5l-bronco-egr-simulator-eliminator-delete

I suppose you could also just delete the whole EGR system entirely and use a 1993 and older ECM.

 

[rocketkart]

Truck looks really good!

Might try this - https://www.egrperformance.com/prod...l-7-5l-bronco-egr-simulator-eliminator-delete

I suppose you could also just delete the whole EGR system entirely and use a 1993 and older ECM.

Will the 93 ecm run the 94 engine?

 

[Shran]

Will the 93 ecm run the 94 engine?

Yes. The main difference is 94 will have a cam sensor and EGR, 93 could have any or all of those or none, 92 and older has none. 93 Ranger is safe, 93 Explorer is less safe.

FYI I put a 94 Explorer engine that had both into a 93 Ranger that came with neither and it worked perfectly.

 

[rocketkart]

what about o2 sensor delete ?

 

[Shran]

Not sure on that, I don't know why you'd want to? It is kind of a valuable tool to determine air/fuel ratios even with a custom tune.

 

[rocketkart]

Not sure on that, I don't know why you'd want to? It is kind of a valuable tool to determine air/fuel ratios even with a custom tune.

10-4 was asking because I’ll have to weld in some pieces to screw in the 02 sensors with the new headers. There’s no provisions for O2 sensors. Was just wondering. Thanks

 

[Shran]

Oh, gotcha. You can get weld in bungs from most of the parts stores, that's what I would do. Actually that's what I did do for my V8 swap, IIRC the O2 sensors were in the Crown Vic manifolds I had that didn't fit my frame so I ended up using 70's 302 truck manifolds instead. I put the bungs in the Y pipe, worked great.

 

[rocketkart]

10-4 appreciate it.

 

[rocketkart]

Putting the new wiring in from the 94 Ford explore to the 88 ranger and I’m wondering do I need to take the abs brake stuff out of the explorer as well to put in the ranger or can I bypass all that ?

 

[rocketkart]

Nobody knows anything about that lol

 

[Shran]

Nobody knows anything about that lol

You can bypass all that junk. Brake light might come on or it might not or the ABS light might come on. I would just pull the bulb.......................

 

[rocketkart]

Making some progress but holy shit the wiring on this thing is crazy but I think I’m gonna make it

 

[rocketkart]

Anyone have pictures of the vacuum diagrams, and the cruise control diagram ???