zhillz
Member
- Joined
- Jan 19, 2012
- Messages
- 17
- Vehicle Year
- 2002
- Transmission
- Automatic
The truck:
2002 Ranger XLT 4x4 with the 4.0 and 4.10 open rear end.
Side steps and toolbox are the only mods done to it when I got it but the toolbox wont open.
At the beginning of the year:
Cranked the bars a little because I hate the nose diving look
3" body lift and 15x8 wheels 2" backspacing
35w 5000k head and fog lights
Wheels where junk so I got Pro Comp 98's 15x10 with 3.75" backspacing
This is how she looks today.
I also made some gap guards. I had one in the front still intact so I made the rears and one up front. Cost $8 at Home Depot for the matting.
2002 Ranger XLT 4x4 with the 4.0 and 4.10 open rear end.
Side steps and toolbox are the only mods done to it when I got it but the toolbox wont open.
At the beginning of the year:
Cranked the bars a little because I hate the nose diving look


3" body lift and 15x8 wheels 2" backspacing
35w 5000k head and fog lights











Wheels where junk so I got Pro Comp 98's 15x10 with 3.75" backspacing
This is how she looks today.







I also made some gap guards. I had one in the front still intact so I made the rears and one up front. Cost $8 at Home Depot for the matting.


Last edited: