ZF 5-speed

[redneckracerx]

This may be a little lengthy but I wanna give you guys the whole story. My setup was a 94 mustang 5.0 with a 157t flex plate, C-4 and a 1354 case. I have since swapped to a ZF and np205. The ZF is out of a 89 F-250 with a 300 I-6. Here is my problem, I have a clutch for the ZF it measures 10" I put it together with a 157t flywheel but apparently the ZF needs a 164t For the starter to engage. I need to find out how to make this thing work. I think I need a 164t flywheel with a 50oz imbalance for the 302 that will accept a 10" clutch. ANYONE, PLEASE HELP!

 

[redneckracerx]

update! I figured out that I needed to run a 164t flywheel from a 91 f-150 with a 5-speed. I also needed to swap to a 11" clutch. I see that no one had any info on this topic so I figured I would post this incase anyone searched.

Goodbye c-4/1354 Hello ZF-5/NP205