Yet another seat question

[99k1500]

I have a 2001 Ranger Standard Cab XLT with 60/40 vinyl seats.
I am looking at some seats from a 2010 Standard Cab
The 2010 seats are also 60/40 cloth with an arm rest.

I have not physically seen the 2010 seats yet. The salvage doesn't list them as compatible, but I would think that could be do to the fact they are not "interchangeable" the 2010 seats probably have airbags and weight sensors... Since my 2001 doesn't have those things I would think I could simply not hook those things up.

Am I thinking correctly? Most threads I see are people doing bucket seats from an explorer or mustang.
Thoughts????

 

[Burls]

You won't have to worry about the sensors but you will have to swap the female ends of the seat belts from your current seats.

 

[99k1500]

Burls,
Thanks and you are correct about the seat belts. The 2001 seats used a torx bolt to thread into the seat. The 2010 seats I used had the bolt in place. Two M10x1.5 flange nuts were required to attach the seat belts.

Otherwise it was a direct swap. I put 2010 cloth 60/40 seats in in order to gain cloth, a arm rest/ console and the drink holder that is attached to the seat. Not to mention the seats and therefore the foam are 9 years newer.

I am happy with the swap.