bigredscowboy
Well-Known Member
The PO(S) replaced the M50D-HD in what is now my 2003 4x4 Edge with an older M50D after dolly towing blew up the original. I didn't find this out until after I put in the rebuilt motor and Hayes Super-Truck Clutch Kit and went looking for the Speedo hole.
After 2 months on the new clutch, I am getting a chatter at the top of the pedal when shifting gears. I assume this is the release/throwout bearing (also new). The clutch release point was near the top from day one.
The P/N for the slave on a 2003 and 1997 are different. The bore diameters and the inlet thread size are different too. -Nathan- used an old style slave when upgrading to the HD (here) but I'm worried that they are not the same length or force, IDK.
I am in a 6-mo old process of buying a 2003 HD from a guy but the stars never align. Any help in the meantime is greatly appreciated.
After 2 months on the new clutch, I am getting a chatter at the top of the pedal when shifting gears. I assume this is the release/throwout bearing (also new). The clutch release point was near the top from day one.
The P/N for the slave on a 2003 and 1997 are different. The bore diameters and the inlet thread size are different too. -Nathan- used an old style slave when upgrading to the HD (here) but I'm worried that they are not the same length or force, IDK.
I am in a 6-mo old process of buying a 2003 HD from a guy but the stars never align. Any help in the meantime is greatly appreciated.