Wiring electric seats, not normal

[swynx]

94 mazda b4000 has electric drivers seat, with up/down at front/back, and forward/backward controls, so 6 wires. The only 2 I care about are forward and reverse, which are red/white and yellow/white.

Problem is I broke off the control switch part, now I've figured out that if I jump power to the forward wire and ground the backwards wire the seat moves, vice versa.

I'm assuming I need a 3 way toggle. But how would I wire this up?

Thanks in advance

 

[swynx]

Never mind, figured it out. Used a switch for the electric windows. If any one cares I'll do a write up since I looked and did not see a similar wiring issue.