will 33's fit?

[FCXBronco2]

i have a 2 inch body lift and 31 1050 mud terrains, my question is if i get some beltech shackles and zero rate add a leafs for the back and coil spacers and explorer coils for the front will that give be enough lift to fit 33 1250 i know it would probobly give me about 2 to 2 1/2 inches but i dont know if something else comes into play besides getting more height

 

[4x4junkie]

On your '84? It'll be close, being you have the bodylift. Might need some minor fender trimming.

BTW, both coil spacers and Explorer coils will likely be too much lift to realign the frontend correctly, I'd use some washers instead (allows fine-tuning of the height better)

 

[FCXBronco2]

yeah im not really worried about fender trimming and dont they make camber shims to fix the alignment issues?

 

[88mudder]

im gonna say no..with trimming yes. It took my gen 1 to clear 33/12.50's with 7" lift no trimming.

With your setup..2" BL + 1" coil spacers= 1.5" lift..explorer coils 1" lift so thats 4.5" up front. Rear you got the 1.5" lift shackles..add a leafs im gonna say 2" based on my experiences..and 2" BL added to that so thats 5.5 in the rear.

You will be able to fit the tires in the rear, but with rubbing and no cutting. The front no way..ive done 3 gen 1's already and it takes alot alot more lift that u think, but if you cut the fenders u can get away with alot more..