Welcome Visitor! Please take a few seconds and selfinflicted
New Member
- Joined
- Jul 18, 2013
- Messages
- 1
- Vehicle Year
- 84
- Transmission
- Automatic
short version. I got 351w, small block c6, np 208,dana 44 and 9in free, all it took was time and labor to rob parts off truck. block may not be no good, got almost .030 ridge around top of cylinder so will have to go at least 60 over to get straight bore which aint a problem until you hear the rest. also have 460 block already bored .030 over, new 4.5in stroke eagle crank, align honed, new cam bearings and lifter bores honed. had planned on building this until this stuff came up. now I've got a friend that's gonna cut me a deal on heads (race prepped) top to bottom. lunati (#64034)cam that matches the heads and c6 transmission. will have to use 208 until D-day which I don't think will be very far away if I go with the 460 build. somebody please tell me which way I should go 351 or 460 truck will be mostly mud bogger some fast track. the 4.5in stroke on crank should give somewhat of an impression as to what was planned at the start
heads, intake, trans and cam $1000.
heads, intake, trans and cam $1000.
Last edited:
