Welcome Visitor! Please take a few seconds and BillRod
Well-Known Member
Hi All
What parts might swap from a 2000 Explorer to a 96 Explorer?
The engine in our 2000 Explorer with the SOHC engine finally gave up to the timing chain guides.
I found a nice 96 Explorer with the 4.0 Pushrod engine so that will be the replacement.
Is there anything mechanical that I can pull from the 2000 to keep on the shelf if needed for the 96?
What can be interchanged between the two?
Brakes?
Ball Joints?
4x4 actuating motor?
Etc, Etc...
Or would it be easier to ask what does not interchange?
Thanks for any advice
Bill
What parts might swap from a 2000 Explorer to a 96 Explorer?
The engine in our 2000 Explorer with the SOHC engine finally gave up to the timing chain guides.
I found a nice 96 Explorer with the 4.0 Pushrod engine so that will be the replacement.
Is there anything mechanical that I can pull from the 2000 to keep on the shelf if needed for the 96?
What can be interchanged between the two?
Brakes?
Ball Joints?
4x4 actuating motor?
Etc, Etc...
Or would it be easier to ask what does not interchange?
Thanks for any advice
Bill
