What did YOU do today?

[scotts90ranger]

for 20mm equivalent try a 25/32"
oddly, they are available.

working on a 4cyl Duratec? timing is easy on those.

for the harmonic balancer bolt did you try the breaker bar against the frame while cranking starter method?

Normally I would do that but at this point we had a camshaft loose and the chain loose so that was NOT an option . Yes at this point we know it's easy but I was trying to take shortcuts... turns out what I was fighting was the ratcheting function of the chain tensioner... no shortcuts available for what I was doing...

13/16" is like 20.3mm or something, it fit real nice, we had like 3 extra plans today, after going to look for deer (saw 5, one buck at full sprint 100 yards away that I saw for 20 yards of his chase of 2 doe before they jumped in the bushes) I went home and made an "inertia socket" and that with my Bauer high torque cordless impact got it off easy... Ended up going to town for a new crank bolt and front seal for good measure. It's all back together now but I went too far with the "bucket", should have got a slightly thicker one now there's some clatter (there's around .010" lash, should be fine not sure why it's loud)

 

[Curious Hound]

Is that a manual shift? I need to get an E-shift to put in storage to replace the AWD box in the Ranger.

Yes. It's manual. It will be replacing an AWD box in "something to be announced in a few weeks (hopefully)". There are 5 or 6 electric ones at my closest yard, including one with Torque On Demand. But I would prefer the manual.

 

[scotts90ranger]

It's a nice clear sunny day, annoyingly for the last weekend day of deer season... when it was foggy I was over at my brothers looking for deers and saw one doe, then the fog cleared so I'm home... was going to go up in the woods but then realized I only had like 4.5 hours of daylight left with the time change... Now I'm home and just finished mowing leaves then climbed up on the garage roof and blew the leaves off then swept the moss off then cleaned the gutters. I don't think I know how to do nothing anymore...

 

[racsan]

Was a nice clear sunny day here with no wind, mid 50’s, Drove 22 miles round trip to my parents & back with the 8N. wow are the back roads rough! Im a little sore now & to think that way back in the day I did this quite often. Before I had a vehicle or license its how I got around unless I rode a bike.

 

[Curious Hound]

Was a nice clear sunny day here with no wind, mid 50’s, Drove 22 miles round trip to my parents & back with the 8N. wow are the back roads rough! Im a little sore now & to think that way back in the day I did this quite often. Before I had a vehicle or license its how I got around unless I rode a bike.

View attachment 135773

Beautiful picture.

 

[sgtsandman]

Today was a light day. The poly tarps that cover the end rafters of the carport removed. They should have been replaced last year but I was getting ready for a deployment. So, time was not a luxury. As a result, they were in very poor shape. I had ordered a heavy duty vinyl tarp to replace the poly tarps earlier this year. Hopefully, it will be some time before these need replaced. Anyway, one rafter has been re-skinned with one half of the vinyl tarp. The other half will get done tomorrow.