want to lift my 2000

[coolman1987us]

I have a 2000 4x4 but it is extremely hard to find lifts for that year. the majority if found is for up to year 97. i know up to 97 wasnt torsion bar front end so those are out. anyone know a good place to get a 3-4 inch lift for a reasonable price?

 

[Fx4wannabe01]

Your only options are the 4" Superlift($1500 new) and the 5" RCD coil-over conversion lift(currently non in production, $2500-3000 new), and a 3" Bodylift($200 new).

I've seen superlifts for around the $600-800 range selling used...gotmine for $450. RCD at about $800-1200 used. Bodylifts are so cheap you should just buy new and not deal with used.

 

[coolman1987us]

the 4" superlift comes with new upper and lower control arms right?

 

[Fx4wannabe01]

no.

Both suspension systems I listed don't. They both come with new knuckles that bridge the larger gap between the upper and lower control arms after the LCA drops are installed.

 

[coolman1987us]

so it drops the whole front cross member then, and you use most of the same components?

 

[Fx4wannabe01]

Both kits use diff drop brackets, lower control arm drops/crossmember drops, torsion bar drop on the superlift, new knuckles.

the stock x-member doesn't actually move, a new x-member is bolted to it.

Superlift:

 

[coolman1987us]

ok that makes sence... your missing a bumper though right?

 

[Fx4wannabe01]

that pic is 2 years old right after the superlift install. lol. Not missing the valence anymore...

 

[coolman1987us]

ya thats what i thought lol... nice setup btw