Welcome Visitor! Please take a few seconds and mattswan267
Well-Known Member
I have a 2002 Ranger, 3.0, auto, 2WD. I bought the truck with no engine, Long story short is that the only engine i could get was out of a 1999 Ranger 3.0.
The truck is still using the 2002 transmission. the 1999 engine harness is missing the plug ins for the VSS near the tailshaft housing. therefore I'm getting no speedometer and the trans shifts funny.
What I'm trying to figure out is what two wires go the the VSS on the back of the trans? (what colors, and where do the lead to?)
I've traced out one of the wires I think through hours of research but i can figure out anything else. I know there is a grey/black wire that i hear is the VSS wire, I found that wire going to the GEM and traced it out to pin #58 on the PCM.
Even if someone with the same truck could take a look under thier truck and tell me what color wires are going the the VSS on the back of the transmision it would be extremely helpfull!!
-thanks!
The truck is still using the 2002 transmission. the 1999 engine harness is missing the plug ins for the VSS near the tailshaft housing. therefore I'm getting no speedometer and the trans shifts funny.
What I'm trying to figure out is what two wires go the the VSS on the back of the trans? (what colors, and where do the lead to?)
I've traced out one of the wires I think through hours of research but i can figure out anything else. I know there is a grey/black wire that i hear is the VSS wire, I found that wire going to the GEM and traced it out to pin #58 on the PCM.
Even if someone with the same truck could take a look under thier truck and tell me what color wires are going the the VSS on the back of the transmision it would be extremely helpfull!!
-thanks!
