Shotokan1509
Well-Known Member
95 4.0, using coolant... not seeing external drips. Headgasket? Other internal possibilities (does intake gasket cross coolant)?
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Using coolant
- Thread starter Shotokan1509
- Start date
starshooter10
Active Member
my 93 had the same issue used a bit of oil as well..
its a known issue...
http://www.therangerstation.com/tech_library/4_0-loose-intake-bolts.html
you'll need:
intake gasket kit (check if your box comes with RTF gasket maker otherwise buy some)
valve cover gaskets
7 pairs of injector O rings
and several hours. took me 6 hours but I also swapped a few other bits while I was in there...
total set me back under 100 bucks
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
