Upgrade/swap for Master Cylinder

[honda34dad]

Looking to swap the Master Cylinder on my '86 Bronco 2. This is what I am thinking now. I have a new Master Cylinder but one of the fittings is for a 1/4" line. To get this to adapt to a 10 MM banjo bolt at the brake caliper, I will need a large number of adapters to get there. Anyone have any ideas? I am thinking of getting a custom steel braided brake line to go from 1/4" to 3/8" line fittings, if that is even possible.

If I could swap in a new master cylinder that just keeps the 3/8" for both outlets, that would be great. Any and all help is appreciated.

 

[mr_manny]

When I replaced my 90 B2 master, I utilized one from a later explorer w/rear disc brakes.
I had to source the correct ends, which wasn't difficult.
This master required a bubble-flare on one of the connections, but nothing the flare tool couldn't take care of.

If you don't already own a flare tool, I would recommend you add one to your tool collection.
Lots of utube vids on how to make your own flares.
HTH