ttb bracket bolt sizes

[pwrranger88]

ive tried searching with no luck i need the length and diameter for the passenger side ttb bracket and where the radius arm crossmember mounts to the frame.

 

[legoms013]

On my truck all the bolts were: 1/2 (diameter) x 1-1/2" (shank) and 3/4 socket size. Coarse thread and nylocs....

With the exception of the three larger ones on the passenger side that are vertical and bolt the bracket the bottom of the frame rail...these are the stock nuts and bolts (as a retaining tab) and the one one the engine crossmember.

 

[whissiswheelin]

I think the main pivot Bolt is 5/8" x 3 1/2" or so...the shank should be at least 2 1/2"...Grade 8 or better, DONT use stainless!

 

[rkneeshaw]

Try searching for a thread titled James Duff Hardware or something like that, I posted quite a few bolt sizes in there