transfercase for transmission help

[QuakerShaker4242]

hey guys i have a 1994 2wd ford ranger 4.0l.

im in the process of converting to 4x4/sas and im a little confused on a certain subject. i wanted to go ahead nd swap the transmissions now so i dont have to later.


what i do know is that for my 4wd conversion i will need to get an entire new transmission, a A4LD tranny just like mine, except out of a 4x4.

what i also know is that to match up with that transmission i will need a bw1354 transfercase.

My question is what is the difference between bw1354 mechanical and electric? is that for manual or automatic? if so i would need a electric transfercase correct?

finally, will the 4x4 transmission crossmember work on my 2wd?

all help is appreciated


thanks,

Cody

 

[orfordguy@yahoo.com]

the trasnfer cases will fit either tranny aslong as you get all the wiring(electric) or shifter assembly(manual) for the swap. I prefer the manual t case more reliable no wiring gremlins to chase down.. the tranny crossmember should still be in the same place but a tape measure will tell you for sure..