tranny crossmember i need help please!

[mbub16]

i am replacing my clutch and the crossmember bolts seized to the bushings. i eventually had to sawzall the bolts off and now i cannot remove the bushings. how do i replace these even if i can. what are other solutions?

 

[ati190]

Find a crossmember from a 2nd gen ranger/1st gen explorer. You'll need to cut the old mounts off your frame. Rather grind the heads off the bolts and pound them through with a punch/hammer. The new one will bolt right in place as you have all the correct holes.. The new one will be solid (no bushings), and bolt in stock location, except on the drivers side will bolt on top of the inside frame rail, with one grade 8 bolt. 3 bolts will be used on the passenger side once the old mount is removed. Much better solution. There will be no vibration issues. or modifications neccesary.