Torsion bars- noob questions


b3million

Forum Member

Joined
Feb 25, 2025
Messages
63
Points
101
City
Nowhere
State - Country
AL - USA
Other
B3000
Vehicle Year
2002
Drive
4WD
Engine
3.0 V6
Transmission
Manual
Hey all. Got some questions about tbars. Sorry if these are stupid in advance.
I'm planning to crank the bars on my truck to get 2" of extra lift out of the front end. But I got to thinking- if cranking the bars makes the front suspension stiffer, what's the chance I can just buy a stiffer set of torsion bars that will yield the same result and potentially allow more give in the suspension?
Second, is there a way to buy a set of torsion keys that are indexed differently from stock to change the ride height without screwing with the give in the suspension? I know the last three years of rangers had factory torsion keys indexed lower than the mid years (my truck's an 02) and so they needed keys with a different index to lift, but I'm more curious about buying a set that are indexed higher than the ones on my truck to achieve a similar result without obliterating suspension rebound.
 
i lifted mine up for a while by just tightening the bars and the ride didn't get stiffer.

its as low as it can on stock bars now and conversely, the ride did not get softer
 
i lifted mine up for a while by just tightening the bars and the ride didn't get stiffer.

its as low as it can on stock bars now and conversely, the ride did not get softer
Good to know, thx. throwing everything at it this weekend so i want to be sure i've got everything together before i go ham.
 
if you tighten and keep going past a certain point then it will get stiffer but it stops lifting by then
 
Raising or lowering the ride height in the front only moves you closer to the top or bottom of the suspension travel. The total suspension travel does not change.

For example.
If you think of the stock ride height of the 0 position and you can go 3" up or 3" down. So you have 6" of total travel.

You raise the front by 2".
Now you have 1" of downward travel and 5" of upward travel.


The spring rate and shape of the torsion key do not have an effect on overall suspension travel.
 

Sponsored Ad

TRS Events & Gatherings

Latest posts

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

TRS Ranger Sponsors


Product Suggestions

Back
Top