Welcome Visitor! Please take a few seconds and 
heptofite
Well-Known Member
- Joined
- Oct 25, 2009
- Messages
- 1,697
- Vehicle Year
- 2019
- Engine
- 2.3 EcoBoost
- Transmission
- Automatic
so, after i had the flywheel in my b2 replaced, i got the truck back from the shop and the torque converter clutch won't unlock in 3 and overdrive, but will unlock in 2 and 1 (where the valve body over-rides lockup, IIRC)
so, i unplugged the harness going to the lockup solenoid to see if it was electrical, and it's still locked up in 3 and OD.
they took the bell off the transmission and replaced the pump seals and bushing while they had the transmission out, is there anything they could have screwed up in there to make the TCC stay locked? or, could my solenoid have just coincidentally taken now as it's time to break?
so, i unplugged the harness going to the lockup solenoid to see if it was electrical, and it's still locked up in 3 and OD.
they took the bell off the transmission and replaced the pump seals and bushing while they had the transmission out, is there anything they could have screwed up in there to make the TCC stay locked? or, could my solenoid have just coincidentally taken now as it's time to break?
