torkin the head down

[dangerranger0690]

specs and pattern please if some one has it i dont have my manual handy

 

[michowski]

Its a 2 step process. First torque em all done to 50ft pounds. Then once all the bolts are to 50ft pounds 2nd torque is an addition 90-100 degree's. I will do numbers to show the bolts for you and start from one and go to ten.

front of the motor is to the left...
9-5-1-3-7
8-4-2-6-10

 

[dangerranger0690]

thanks much

 

[Dave R]

Umm, if your working on your '86 that's not the right torque sequence. You do NOT have torque-to-yield head bolts. Unfortunately my manuals are up in the shop but, off the top of my head, torque is done in 3 steps, 30, 60 and 95ft-lbs.

The torque pattern is correct though.

 

[dangerranger0690]

ok