Tire and fender help

[nightcop]

I have an 88 ranger XLT. 3 " body lift.. just put 31 1050 15 on the truck. The left side front has plenty of room and no rubbing. How ever right side rubs pretty good . When I got to looking at everything with tire straight the right side is just over an inch closer to the finder than the left. Any way to fix this with out cutting fender?

 

[alwaysFlOoReD]

Make sure all the bodymounts and suspension bushings are good. Has your truck been in an accident?

 

[Kayakcrazy]

That's what I was thinking too. Something sounds bent.
I had 31's on an 85 b2 with no lift and barely scrubbed at all and only if I was off road.

 

[nightcop]

That's was something I planned on. Checking tomorrow on my day off. I have 90 b2 with the same set up but don't have any problems with it.. I am googling to compare the two side by side to see. I don't know if it was wrecked or not. Went I got it. It didn't looked wrecked

 

[nightcop]

Well I guess shocks could be bad . Truck sets one inch lower on right side than driver side. Can't find anything bent.. all body mounts look good.. going to change out shocks and start there.

 

[SenorNoob]

I don't understand. What do shocks have to do with ride height?