• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Time for plugs?


PetroleumJunkie412

Officially missing
TRS 20th Anniversary
TRS Event Participant
Joined
Oct 31, 2018
Messages
7,825
City
Dirtman's Basement
Vehicle Year
1988
Transmission
Manual
My credo
Give 'yer balls a tug. Fight me.
Run em or change em? Currently gapped at 0.058-ish

20230606_170406.jpg


20230606_170402.jpg






Also.... I'm not 100% sure they're the right ones... Autolite XP5144.

2011 4.0L
 
My sunfire has 420,000km on it. I put 50,000 on since i bought it.I changed out the spark plugs. I had never changed them since I bought it. They were iridium plugs. 2 were missing the iridium... It ran pretty good actually. But I am getting slightly better fuel mileage so they lack of the center electrodes must have been doing something 🤷‍♂️
 

Attachments

  • Screenshot_20230606-194833_Gallery.jpg
    Screenshot_20230606-194833_Gallery.jpg
    139 KB · Views: 65
My sunfire has 420,000km on it. I put 50,000 on since i bought it.I changed out the spark plugs. I had never changed them since I bought it. They were iridium plugs. 2 were missing the iridium... It ran pretty good actually. But I am getting slightly better fuel mileage so they lack of the center electrodes must have been doing something 🤷‍♂️
Wtf is a kilometer?
 
I would run them but as said put the gap back at 0.054"
And reverse them, so 1, 2, 3, go to the 4, 5, 6 side and they come over to the 1, 2, 3 side

Waste Spark will wear down those thin centers faster than it will the ends
Or reverse spark plugs wires on coil pack
3 4
2 6
1 5
to
4 3
6 2
5 1

Thats why you should only use regular copper(no coating) or Double Coating
Single coating is a waste of money because one side will wear out faster than the other

Looks like alwaysFlOoReD suffered from that
 
I would run them but as said put the gap back at 0.054"
And reverse them, so 1, 2, 3, go to the 4, 5, 6 side and they come over to the 1, 2, 3 side

Waste Spark will wear down those thin centers faster than it will the ends
Or reverse spark plugs wires on coil pack
3 4
2 6
1 5
to
4 3
6 2
5 1

Thats why you should only use regular copper(no coating) or Double Coating
Single coating is a waste of money because one side will wear out faster than the other

Looks like alwaysFlOoReD suffered from that
Looks like I didn't catch that... thanks for pointing it out. I do believe I went to copper.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top