There is such a thing as too many tools, especially when they're just in the way.

[Ranger850]

I am like that with my tool box at work only, the drawers are even labeled! Not so much at home, although the garage is more organized than the house or yard (many sheds and junk piles).

I've started making a sell/donate pile. Got a buddy who just got into welding coming over this weekend to peruse some of the metal working tools I'd part with. I don't need 3 chop saws, 3 bench grinders and 4 vises.

Are you sure?
Give one away, one breaks, now you're down to you're shittyest one and one for Parts, IF they're compatible.

 

[Eddo Rogue]

He was a pilot in the Korean War, then flew for Boeing for a long time. He knew Mr. Boeing, personally. He quit flying before I was born, (1977) so those pliers are definitely older than I am, and work perfectly to this day.

Those vintage ones are the best ones to get, good condition examples sell for top dollar on fleabay. I'd hang on to it. Most common use for us is safety wiring motorcycle grips . Most pairs have grooves in em for it. The bigger pairs (9"+) are good for twisting regular bailing wire too.

 

[RonD]

Socket holder strips are the best
You can take one(or two) out to the vehicle to find "what's the right size", metric or SAE

 

[Eddo Rogue]

Are you sure?
Give one away, one breaks, now you're down to you're shittyest one and one for Parts, IF they're compatible.

The abrasive chopsaws I will never use, its just way to crude. I have a slugger w/ a blade for cutting stainless and its magic. Got band saws too. Anything else I'm deadly with a cuttoff wheel. I will keep my two good grinders, and use one for polishing. One is brand new in the box on the shelf for years, so I obviously don't need it. I'm more of a belt/disc sander guy now, pretty much just use the bench grinder for TIG tungsten tip cleaning.

 

[Eddo Rogue]

Socket holder strips are the best
You can take one(or two) out to the vehicle to find "what's the right size", metric or SAE

I love those things. screw bit holders too. the small stuff aint bad. its more like a crap ton of wrenches, piles f allen keys, old drills and saws. hand saws, sawz alls etc..

 

[Eddo Rogue]

Thanks guys, I feel a little better now....might even set some stuff on the curb today lol.

 

[Shran]

I've been thinking about getting rid of my abrasive chop saw too. I bet I have used it maybe once since I built my shop in '16. It was really useful back in the day before I had band saws and stuff but now just the thought of using it annoys me, sparks everywhere, burrs on everything and wildly inaccurate cuts. I may replace it with a metal cutting miter saw since I can't use those blades on my saw.

Speaking of oddball tools, I have a pair of Klein Scotch-lock crimp pliers that I will probably never use. I couldn't pass it up for 50 cents or whatever it was I paid for it...

 

[Snoranger]

I have:
Work tools (supplied by work, never leave the shop.)
Service truck tools (supplied by work, never go into the shop.)
Bigger Snap on box (filled with Snap on tools that I purchased and used only at work before I got my government job.)
Smaller Snap on box ( I won the box from my old dealer. The box is full of mostly Snap on/ Matco/ Mac. I used these tools for automotive work at home.)
Basement craftsman toolbox (older tools that got replaced with Snap on stuff over the years. Used for around the house repairs.)
RC car workshop tools ( used in my workshop for building/ repairing r/c cars or similar projects.)

I have issues.

 

[19Walt93]

The only thing I'm ocd organized about is my toolbox lol.

Trucks a mess, room is a mess, when I have hair on my head it's a mess... tool box though.. gotta look like someone on too much Adderall organized it every day for a week or I'm not happy.


Any tools you don't want feel free to send my way eddo lol. I'll even pay half for shipping, just to help out.

There's no such thing as OCD, that's what the slobs call someone who's organized.

 

[Eddo Rogue]

I've been thinking about getting rid of my abrasive chop saw too. I bet I have used it maybe once since I built my shop in '16. It was really useful back in the day before I had band saws and stuff but now just the thought of using it annoys me, sparks everywhere, burrs on everything and wildly inaccurate cuts. I may replace it with a metal cutting miter saw since I can't use those blades on my saw.

Speaking of oddball tools, I have a pair of Klein Scotch-lock crimp pliers that I will probably never use. I couldn't pass it up for 50 cents or whatever it was I paid for it...

They are only good for very rough cuts, and entertaining girls or pretty boys that want to play shop (they like sparks). I stopped using em years ago. Might as well go angle grinder cutoff wheel. I stuck to band saws, until I discovered the slugger. This thing cuts mild steel like butter, dang straight too, especially if you purchase the blade for cutting stainless. they aren't cheap ($140-$170 a blade), but if you don't chip a tooth. they can be resharpened. There's a few other brands, but the bases on em suck, this is the only one that actually holds and cuts miters (I still add clamps anyways). I'm gonna give away my old beat makita and a stack of abrasive blades this weekend. Got my slugger for $480 from the local Airgas shop. I love when brick and mortar beats online prices (and service).

Fein Slugger Metal Cutting Saw, 72905361120, 14 inch Chop Saw

The Fein Slugger 14 inch Chop Saw cuts metal faster and safer than abrasive cut-off saws. Cuts are made quickly and cleanly cut through various metals.

www.trick-tools.com

 

[Eddo Rogue]

I have:
Work tools (supplied by work, never leave the shop.)
Service truck tools (supplied by work, never go into the shop.)
Bigger Snap on box (filled with Snap on tools that I purchased and used only at work before I got my government job.)
Smaller Snap on box ( I won the box from my old dealer. The box is full of mostly Snap on/ Matco/ Mac. I used these tools for automotive work at home.)
Basement craftsman toolbox (older tools that got replaced with Snap on stuff over the years. Used for around the house repairs.)
RC car workshop tools ( used in my workshop for building/ repairing r/c cars or similar projects.)

I have issues.

That actually sounds pretty organized.

 

[Roert42]

I’ve never heard of a slugger. I’m guessing it’s a name brand of for a type of cold saw.

They are the tits for accuracy in your cuts. Puts any band saw to shame.


Nothing beats the abrasive chop saw for cheap and fast.

 

[Vindictus]

I've started making a sell/donate pile. Got a buddy who just got into welding coming over this weekend to peruse some of the metal working tools I'd part with. I don't need 3 chop saws, 3 bench grinders and 4 vises.

What do you mean!! Too many? 3 compressors, 7-8 hacksaws, 3 different sets of wrenches to be honest I don't think I have 1 of any tool . I guess being a tool buying Junkie is better than dope junkie. Maybe??

 

[Eddo Rogue]

What do you mean!! Too many? 3 compressors, 7-8 hacksaws, 3 different sets of wrenches to be honest I don't think I have 1 of any tool . I guess being a tool buying Junkie is better than dope junkie. Maybe??

Lol maybe. I have a lot of wrenches too, and duplicates of anything important, which is a lot of things

 

[gaz]

@Eddo Rogue ,
I will assemble a tool kit for regular evolutions and even some special types of jobs. For example:
1) I have a set of tools that I take to the junkyard
2) set of tools for impact
3) set for rivet jobs
4) set for motorcycles
5) set for bicycles
6) set for construction
7) set for automotive

I keep them very streamlined, if I learn a new special tool need, I may add it to a set or just keep that in with miscellaneous special tools storage.

I just recently expanded my impact potential with a nice set of SAE/Metric Tekton ⅜" deep/standard sockets, extensions and universals; prior to this, I had been milking my trusty Chicago Tool ½" drive metric, 10mm+ only set. Tearing apart that 94 Explorer, I made way better time using 18v impact for disassembly and have had to support it to adapt it to the be the norm.

With a large rivet structural repair upcoming, I upgraded my riveting kit with a Ingersoll Rand 118max long stroke gun, extra long anvil for steel rivets, my favorite buck bar and a coveted Cherrymax rivet sizer. Prior to this expansion, I had only used blind fasten rivets at home.