TFI module ducting

[bfiakas]

Over the years I have been having connections problems with the TFI remote I had done and have gone back to the drawing board on it.But in the mean time I was curious on how hot the TFI module got here in Phoenix,AZ.So I have a Bell in door/outdoor temperature gauge with a 10 ft lead I bought at O'riellys a couple years back and RTV'd it to the module.On a summer day of a 110 degs. with city and freeway driving the maximum temp was 155 degs. So off to Home Depot to the plumbing section to look for 3 inch dia. exhaust gas vent tubing with a max.expanding length of 8 ft. for $10 bucks. I mounted it on the driver side open intake port above the charcoal canister back to the distributor behind the plug wires and zip tied it to keep it in place.Went for a test drive and was surprised that with the outside temp at 111 degs and with the same route taken,the module temp was down to 115 to 122 degs.

 

[bobbywalter]

i dont think 150 is too bad


i do think 115 is real good though.

 

[RonD]

CAI for TFI, lol.

Hey you could have a sellable product there, too bad Ford dropped the TFI system
Get a diffuser and spread some of that air to the coil, those things cook as well

CAI(cold air intake)

 

[Slammin Sam]

Thats why Ford moved the TFI to a remote location with a heat sink on later models.