So I switched my truck bed to a Mazda 1998 b3000 And now my taillights aren’t working the reverse lights and main tail lights work but the signal and brake lights do not work I was wondering maybe it’s because the Mazda has three lights vs the two or maybe an adapter I can buy any suggestions?
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Tail light adapter
- Thread starter Jayt84107
- Start date
Welcome to TRS 
Yes, they are used for trailer light hook ups but you can use them for your tail lights
You need a trailer 2 to 3 wire adapter
Your 2002 has 2 wires for the turn/brake, a left and right, the turn signal stalk(multi-function switch) is where the brake is combined with turn
1998 bed uses 3 wire, left/right turn and then brake
The adapters are weather proof, made to be mounted under the rear of a vehicle
More common is the 3 to 2 wire, you do not want that one, you want 2 to 3 wire
You can also swap tail lights to the 2 wire version
Yes, they are used for trailer light hook ups but you can use them for your tail lights
You need a trailer 2 to 3 wire adapter
Your 2002 has 2 wires for the turn/brake, a left and right, the turn signal stalk(multi-function switch) is where the brake is combined with turn
1998 bed uses 3 wire, left/right turn and then brake
The adapters are weather proof, made to be mounted under the rear of a vehicle
More common is the 3 to 2 wire, you do not want that one, you want 2 to 3 wire
You can also swap tail lights to the 2 wire version
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
