Stock 90 B2 will 31x10.5s fit???

[buzz88]

Posted this before in wheels but thought B2 section is better maybe

Will 31x10.5s fit on a stock b2 1990, with 15x8 AR tailgunner 2 rims or has anyone run this size without any rubbing on a 90 B2? I know it's pushing it but...Thanks

 

[Boggin]

yes they will. you MIGHT get some rubbing at full turn

 

[TexCaliBII]

Yep,
They'll rub in turns and when the suspension moves up. 30" is the max size for a stock BII, at least in my experience.

 

[tomisb]

Any pics of stock height BII's with 31's? Im courious too. Mine is supposably stock with 31's but i have more room than most that are stock but im not sure.

 

[88_Eddie]

wasnt there just a thread on this?

yes, they fit, they may rub a little depending on your suspension. my sway bars are gone, so i only get a little bit of rubbing on the fender, not enough for me to care. they are 31x10.5's

 

[country0001]

I'm gettin ready to put 31's on explorer rims on my b2

 

[tomisb]

Hmm. mine looks a little bit higher than that.

 

[88_Eddie]

^
you could have a body lift on it, or some leveling coils and a block out back, put up some pics of the suspension and body mounts and we can tell

 

[tomisb]

No body lift for sure. Possibly it might have explorer springs all the way around. I replaced the rear leafs with jeep comanche leafs and it just leveled it out and moved the rear axel back 3/4".

 

[gribly]

Also remember, depending on brand, 31" tires range from 30" to just under 32", not all tires are the same. That's why when you're concerned about a tire fitting your truck, bring a tape measure when you buy them. My 31" tires are actually 30.5".

 

[tomisb]

mine are BFG AT's 31x10.50x15

 

[trail B2]

I had a set fit but it had explorer coils just for another idea.

 

[tomisb]

Im kind of thinkin the PO installed explorer springs all the way around and neglected to tell me.