Just replaced my front right bearing hub assembly. After I put everything back together the steering wheel chatters when you straighten it out after a turn. Any ideas?
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Steering wheel chatter
- Thread starter RavoHimself
- Start date
adsm08
Senior Master Grease Monkey
Supporting Member
Article Contributor
Ford Technician
TRS 20th Anniversary
- Joined
- Sep 20, 2009
- Messages
- 34,623
- City
- Dillsburg PA
- Vehicle Year
- 1987
- Engine
- 4.0 V6
- Transmission
- Manual
- Tire Size
- 31X10.50X15
Sounds like you got air in the steering. Go drive straight for like 15 miles.
Or you didn't put something together right. Check that before driving too far.
Or you didn't put something together right. Check that before driving too far.
That's what it felt like to me at first but there should be no reason it got air in the system. As for the hub I'll give it another look but it's only 3 bolts and the axle nut. Can't see how I could mess that up
Whatever the problem was it sorted itself out. Ended up having to replace the hub again anyway. Couldn't figure out why the abs light was on either. Turns out I must have cracked the abs sensor taking it out and when I put it in the new hub it broke and sheared every tooth off the tone ring. I guess that will do it. Lol
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
