springs for sas

[moonman85]

If I use my stock coil buckets can I get away with using bronco graveyards 2.5" coils? By what ive read using stock coil buckets will give about an additional 3" of lift. Is this true? Im trying to keep the center of gravity low so I don't want to jack it to the sky. Any suggestions would be great.

 

[hockeyryan]

Im running 3.5" eb coils and i have to cut the engine cross member quite a bit. My center of gravity is still pretty low id say. I have about 51/2"-6" of lift with those coils. Hope that helps

 

[moonman85]

Are you using the stock coil buckets or are u running aftermarket buckets?

 

[hockeyryan]

Im running stock buckets

this is how it sits with stock buckets and 3.5" eb coils. Rear is chevy 63 swap with belltecs. and rolling on 37s

 

[moonman85]

Nice truck! Thanks for the reply! That clears things up.