Welcome Visitor! Please take a few seconds and keithm
Well-Known Member
- Joined
- Mar 1, 2011
- Messages
- 97
- Vehicle Year
- 90 Ranger with
- Transmission
- Manual
I've installed an aod behind mt 302 and have been driving it now for 3 days, I've found 2 problems
first the speedo is reading 10 mph fast, i've read alot about the driven gear changes , no big deal but do i need smaller or larger I would think larger.
i had to put a light helper spring on the lokar arm because the tv arm is just a slight amount from closing so the pressure was reading high at idle with no tension on the cable, all is normal as far as pressure. but it takes a tremendous amount of foot pressure to move, anybody ever run into this.
keith
first the speedo is reading 10 mph fast, i've read alot about the driven gear changes , no big deal but do i need smaller or larger I would think larger.
i had to put a light helper spring on the lokar arm because the tv arm is just a slight amount from closing so the pressure was reading high at idle with no tension on the cable, all is normal as far as pressure. but it takes a tremendous amount of foot pressure to move, anybody ever run into this.
keith
