Speaker wire harness

[H munster]

Hey guys does anyone know if the speaker harness was changed between 93 and 94 for the explorer? Bought a new deck and adapter kit up to 93 and the adapter doesnt fit the speaker harness. Oh yea mine was made 12/93 and titled 94

 

[Ranger SVO]

The 93 and 94 are the same, but remember that there are two different harnesses. One for systems with a factory amp and one without.

It changed in 95 to a completely different harness

 

[red85]

check this out : http://www.the12volt.comonce you're there click on vehicle wiring and look up the vehicle you need. I use this quite a bit at work for installing remote starters.

 

[H munster]

thanks for the info- I dont want to cut the plugs off so ill swing over to the electronics store and look for a different addapaper. That web site would have been great a few years ago when some a@* stole the deck out of my BII. I guess he needed extra wiring for his project, he cut it way back in the dash.

 

[Ranger SVO]

thanks for the info- I dont want to cut the plugs off so ill swing over to the electronics store and look for a different addapaper.

No professional installer will cut off a factory plug. We refuse to destroy a vehicle. Are the plugs in your ride both the same size or is one a small square plug?

 

[nidf88]

could be one of 2 harnesses. the non amped has 2 flat plugs, amped has one flat plug and the bastard squared ended plug that the pins never line up right in (metra 70-5511). you probably have the 5511 plug. try to pick up a 70-5514, it has the eliminator harness in it too for about the same price $20. the amp is located under the right (p/s) rear interior quarter panel. it will sound better with an after market deck if you bypass it.