spacers??

[aflo39]

ok i was palnnning on putting blocks under my truck in the back and was wondering bout what the limit was for just useing coil spring spacers in the back? i was really thinking bout useing nice thick wahers, and wanted some opinion!

 

[NMB2]

i dont fully understand what you're asking. You are talking about putting blocks in the back, then you talk about using washers for coil spring spacers in the back?

 

[mconn116]

I don't understand what you don't get, he clearly wants to make coil spring spacers out of washers for the back to lift his leaf sprung rear truck! haha seriously though your truck has leaves in the back... gunna be kinda hard to use coil spring spacers on a leaf spring....

 

[NMB2]

I don't understand what you don't get, he clearly wants to make coil spring spacers out of washers for the back to lift his leaf sprung rear truck! haha seriously though your truck has leaves in the back... gunna be kinda hard to use coil spring spacers on a leaf spring....

i read the first sentence and before i could get to the second, reread it, and thought to myself. wtf?

 

[86 slo-vo]

my opinion is you need do do more research...

 

[aflo39]

sorry i meant to say washers up front under the coil springs and blocks in the back. and wanted to know bout what yall thought the limit for coil spacers was?

 

[NMB2]

pretty sure this is covered in the tech section. go find it.

 

[aflo39]

ok i got a 3in body lift and wanted to go 3 more ins with coil spring spacer up front and blocks in the back, and wanted to know if it was possiable without messing up my driveshaft?

 

[NMB2]

i think 3" is too much for the TTB w/o causing problems with the stock components.

 

[86 slo-vo]

yup.... 2 inch max without adding drop brackets and such

 

[mconn116]

yeah 2 inches is about the max, and if your wantin more height just level it out, if you want the rear up higher too use explorer leafs that way you wont have to go with too big of a block in the rear, could have searched or just looked in the tech library and found that though