Seatbelt hardware and bench seats?

[88inprogress]

I recently removed the carpet and seats out of my 88 standard cab because I plan on replacing it with vinyl. The previous owner did a terrible job with the flooring and when removing the seatbelts I realized the bolts were wrong. They were losely sitting there with about 80% of the threads showing. Does anyone know what bolts hold these in and where I could get them? Unfortunately junk yards up here are few and far between and like to mark everything up 500%. 1 last thing while the seats are out, is there a bench seat that bolts in without or minimal modification? I'm not afraid to bust out the tools

 

[srteach]

In my 96 ranger, the bolts that hold the seats down was a 10x1.25 bolt (14mm head). they can be as long as you want because the bolt threads go through the seat pan.

if you are talking bout the seat belt bolts, I believe they are 12mm with a T55 button top bolt.

 

[88inprogress]

Sounds good. Hopefully ace has em so I can try it in the parking lot. They're pretty good about returns if it dosent work. To the store!