Rub issues

[LittleBigFoot]

I got a set of 35x15.5r15s for 100 bucks. The only problem is that they rub on my fenders below my cab, the frame, and the torsion bars. Not good!
I talked to a few off roading buddies and the general suggestion is either:

1" spacers (to start with)

Or:

Cut out my wheels and change the offset


Any other suggestions?


Thanks,
Adam

 

[Hahnsb2]

Could you buy a set of wheels with less backspacing so the stick out farther? And then sell your current ones...

 

[dangeranger01]

A further offset wheel, then fiberglass fenders.

 

[LittleBigFoot]

Well, I've decided that I'm just going to run a stock set of 29s until I finish the SAS. After that they should be fine. Thanks for the advice


Adam