• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Rims for my 2003 FX4


mud junky

Well-Known Member
U.S. Military - Veteran
Joined
Oct 7, 2010
Messages
230
City
NH
Vehicle Year
1988/2003
Transmission
Manual
im looking to get new rims and rubber for my 2003 FX4. i would rather go with 15x8's if i can get away with it. but not sure i can. i tried putting my tires from my B2 on to see if they would fit. 35x12.50R15 on 15x8 steel rims with a 3.75 back spacing and they did clear the calipers, but not by much. i would say maybe 1/4 clearance. the thing is that some of the local cops can get realy picky about tires sticking out to far so i need to get rims with a 4.5 backspacing for my ranger. also i would like to get aluminum rims. both of which i would assume would bring the inner wall of the rim closer to the calipers. so im not sure i could get away with 15x8 aluminum rims with a 4.5" backspacing on my 2003 FX4 ranger. anyone know for sure one way or the other about this?
 
Stock ranger with stock tires seems to rub the darn wheel-well "splash guards"... does yours? My 98 ranger did the same thing as my 01 does.
 
my Ranger came stock with 245/75R16 on 16x7 rims with 4.5" back spacing. no i did not have any rubbing issues. i now have a 3" body lift, and the same tires. im looking to go to a 33x12.50R15 tire on a 15x8 rim with a 4.5" backspacing if that will work. if not i will be doing 285/75R16 tires on 16x8 rims with 4.5" backspacing.
 
interesting, I have the same exact size tires. I'm chalking you up as one that doesn't have the issue. i envy you!
 
i might have had rubbing issues if i had taken it off road all stock. even with the body lift i can stuff the shit out of the stock tires off road, so i assume without it i would have some rubbing.
 
No rubbing on mine, even when I had 245 65 16s on the truck - even off road. Supposedly the wells are big enough (on the standard 4x4, not sure about FX) to take up to 32s on the 16s w/o rubbing - I have not tried, just heard that from one of the engineers at the plant in Jersey back when I was buying mine.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top